We use cookies on this site to enhance your experience. Find out more here.
/ Uw Recessed
Design: OM + Bartenbach GmbH
Recessed luminaire with housing made of aluminium with 25 micron maximum corrosion resistance anodization in matte finish or electrostatic 100% polyester paint with textured finish.
Aluminium anodised end caps with matt finish or electrostatic 100% polyester paint with textured-finish.
Linear extruded lenses (Lightstream) combined with a secondary reflector, integrated into an extruded aluminium profile.
Fitting accessories ordered separately.
Recessed luminaire with housing made of aluminium with 25 micron maximum corrosion resistance anodization in matte finish or electrostatic 100% polyester paint with textured finish.
Aluminium anodised end caps with matt finish or electrostatic 100% polyester paint with textured-finish.
Linear extruded lenses (Lightstream) combined with a secondary reflector, integrated into an extruded aluminium profile.
Fitting accessories ordered separately.
| Color temperature | 3000K | CRI | >90 | |
| Beam Angle | Wallwasher | LOR | 45% | |
| UGR | - | Colour deviation | 2-step MacAdam | |
| Light source power | 32W | Life time | >50.000h, L80/B10 | |
| Light source flux | 3200lm | Control | DALI | |
| Light source efficiency | 100lm/W | IP rating | 20 | |
| Luminaire power | 37,6W | IK rating | - | |
| Luminaire flux | 1450lm | Weight | 2Kg | |
| Luminaire efficiency | 39lm/W | Wiring | 230Vac | 50/60Hz |
| Color temperature | 3000K |
| Beam Angle | Wallwasher |
| UGR | - |
| Light source power | 32W |
| Light source flux | 3200lm |
| Light source efficiency | 100lm/W |
| Luminaire power | 37,6W |
| Luminaire flux | 1450lm |
| Luminaire efficiency | 39lm/W |
| CRI | >90 |
| LOR | 45% |
| Colour deviation | 2-step MacAdam |
| Life time | >50.000h, L80/B10 |
| Control | DALI |
| IP rating | 20 |
| IK rating | - |
| Weight | 2Kg |
| Wiring | 230Vac | 50/60Hz |
Last Update: 21 November, 2022
/ Downloads
/ Accessories
Mandatory
51027 Recessed fitting acessoryFor the specific supply of "DALI 2" drivers, please contact: support@om-light.com
O/M recommends that any false ceilings intended for recessed products should be installed only after the products to be used have been chosen. The same applies when preparing openings for this type of product. O/M recommends reinforcing false ceilings close to any such openings, in accordance with the characteristics of the product to be recessed. The cutout dimensions are for plasterboard ceilings. For other type of material please contact: support@om-light.com